Industrial Combustion is a leading manufacturer of burners designed for commercial, industrial, and institutional applications. Industrial Combustion’s trademark is their high, industrial quality provided at the same costs as inexpensive competitors equipment.

Industrial Combustion specializes in both new and retrofitted applications, including highly economical combination gas/oil models. They provide systems that include low NOx, FGR for all burner applications along with complete accessories to maximize your burner needs.
 

Contact your Associated Equipment Sales representative about any of the fine Industrial Combustion products below:

D Series Hev-E-Duty Forced Draft Dual Fuel Burners

The D-Series gas, oil, and combination gas/oil burners are a forced draft packaged burner system. Known for its trouble-free operation and efficient performance, the D-Series Burners are ideal for a wide range of applications from 4,200,000 btu/hr to 42,000,000 btu/hr.  Design Features Include:

• Low-pressure air atomizing system on oil with rotary vane compressor
• Piston-type positive displacement oil metering system
• Cam trim for consistent air/fuel ratios
• 14-point adjustment range
• Nozzle line electric heater standard on medium to heavy oil burners
• Hinged air housing for easy access/servicing
• Gas manifold on oil burners for upgrade to combination units
• Backward-curved impeller provides adequate combustion air for various furnace pressures and high-altitude applications
• Rotary damper system with silencer
• Refractory combustion cone
• Full modulation and high turndown ratios

K-Series Forced Draft Dual Fuel Burners

The K-Series Burners are designed to operate on gas, oil, or a combination of fuels at capacities ranging from 1,260,000 to 14,500,000 Btu/H. The K-Series Burners are specially designed for Scotch Marine-type firetube boilers. The design of these units feature low CO performance, a unique air damper for easy combustion set-up independent low and high fire adjustment.

Additional Design Features Include:

• Pressure atomizing burner
• Gas manifold on oil burners for upgrade to combination units
• Backward-curved impeller with lifetime warranty
• Multi-blade-type air damper systems with silencer
• M-Series Forced Draft Dual Fuel Burners

M-Series Forced Draft Dual Fuel Burners

The M-Series Burners include gas, oil, and gas/oil combinations from 1,400,000 Btu/h to 10,500,000 Btu/h. These U/L and cU/L listed units are designed for a wide range of applications including boilers, heaters, furnaces, kilns, and dryers.

Design Features Include:

• Low-pressure air atomizing system on oil with rotary vane compressor
• Piston-type positive displacement oil metering pump
• Cam trim for consistent air/fuel ratios
• 14-point adjustment range M34-63
• Nozzle line electric heater standard on medium to heavy oil burners
• Hinged air housing for easy access/servicing
• Gas manifold on oil burners for upgrade to combination units
• Backward-curved impeller provides adequate combustion air for various furnace pressures and high-altitude applications
• Multi-blade-type air damper systems with silencer Refractory combustion cone
• Full modulation and high turndown ratios

S1-Series Burners

The Series 1 burners are designed for large boilers applications with capacities from 46,200,000 btu/hr to 63,000,000 btu/hr. A forced draft design is able to handle the high furnace pressures, multi-fuels, and is also available as a low NOx <30 ppm with F.G.R.

Design Features Include:

• Dual gas manifold
• Cam trim for consistent fuel/air ratios
• High turndown ratios
• 14 points adjustment range
• Air or steam atomizing
• Top or bottom F.G.R. connection
• Backward-curved aluminum impeller
• Gas manifold standard on all oil units
• Hinged swing-away housing for easy service

Click here to enter Industrial Combustion’s website